Klantenservice
0
Sluiten

Categorieën

Filters

    HOBO opgeloste zuurstofsensor voor MX800-serie

    €1.949,96
    • Inclusief 21% btw: €1.949,96
    • Exclusief btw: €1.611,54
    0 Op voorraad: Levertijd op aanvraag
    Een opgeloste zuurstof- en temperatuursensor voor gebruik met HOBO MX800-serie waterloggers... Toon meer
    • Gratis verzending in Nederland vanaf €35,-
    • Op werkdagen voor 17:00 uur besteld? Zelfde dag verzonden!
    • Niet goed? Geld terug
    • We denken graag met u mee!

    Productomschrijving

    The dissolved oxygen sensor is an interchangeable sensor that works with HOBO MX800 Series Water Loggers to measure dissolved oxygen and temperature.

    The DO sensor can be attached directly to the fully submersible MX801 model, or attached via cable to the direct read MX802 model, which doesn’t require having to pull the sensor out of the water to download data.

    When this sensor is connected to a HOBO MX800 logger that also has a conductivity or CTD sensor attached, the logger can record salinity-adjusted DO directly. With this sensor attached to the HOBO MX802 direct read model, the logger can calculate DO percent saturation directly.  When used with fully submersible HOBO MX801 model, a barometric logger data file (from either an MX802 or MX2001 logger) is needed to calculate DO percent saturation, for post-processing in the HOBOconnect app. In waters with changing salinity, the logger must also have a salinity sensor attached or you will need an MX800 salinity data file to get DO percent saturation.

    Features

    • User-replaceable DO cap lasts 2 years or more
    • High accuracy measurements, even without calibration
    • Get salinity-adjusted DO directly when used with conductivity sensor (W-CT or W-CTD), no need for post-processing
    • Direct DO percent saturation data, no need for post-processing (when used with MX802)
    • Easy calibration with included calibration boot – saves time
    • 1” diameter for use in narrow wells (with cable to MX802 above the well)
    • PVC housing holds up in saltwater

    Please note:

    Requires a HOBO MX801 or MX802 Data Logger, the HOBOconnect app, and a compatible mobile device or Windows computer. System requirements for the app can be found at the bottom of the HOBOconnect software page.

    HOBO Dissolved Oxygen Sensor for MX800 series

    Optical Sensor

    (dynamic luminescence quenching)

    Measurement Range

    0 to 60 mg/L; 0-600% Saturation

    Accuracy

    Out-of-box: ±0.2 mg/L (typical) over the range of 0 to 20 mg/L
    ±4% over the range of 20 to 60 mg/L
    With user calibration: ±0.1 mg/L over the range of 0 to 20 mg/L; ±2% over the range of 20 to 60 mg/L

    Resolution

    0.01 mg/L

    Sensor Drift

    Accuracy is maintained for 2 years; aside from the effects of fouling

    Response Time

    To 90% in less than 45 sec

    Specificaties

    Artikelnummer
    W-DO

    Reviews

    0 from 5Based on 0 reviews
    Schrijf je eigen review

    Er zijn nog geen reviews geschreven over dit product..

    Gerelateerde producten

    Maak uw bestelling compleet

    HOBO opgeloste zuurstofsensor voor MX800-serie
    € 1.949,96
    HOBO opgeloste zuurstofsensor voor MX800-serie
    0 Op voorraad: Levertijd op aanvraag
    Toevoegen aan winkelwagen

    Recent bekeken