EarSight Standard PIP Stereo Microfoon

Name: Immersive Soundscapes EarSight Standard PIP Stereo Microfoon
Brand: Immersive Soundscapes
Price: 109.00 EUR
Availability: InStock

Alles over Microfoons

Merk: Immersive Soundscapes

€109,- 4 Op voorraad: Op werkdagen voor 17:00 besteld, zelfde dag verzonden.

Handgemaakt stereo microfoons met PIP-aansluiting. Zeer geschikt voor akoestische buitenopnames i.c.m. met uw audiorecorder.... Toon meer

Gratis verzending in Nederland vanaf €35,- *
Op werkdagen voor 17:00 uur besteld? Zelfde dag verzonden!
Niet goed? Geld terug
We denken graag met u mee!

Productomschrijving

Earsight is a brand new stereo microphone, an exclusive Immersive Soundscapes product, handcrafted in France. This microphone will increase the capacity of your mobile audio recorder as it is extremely sensitive and has a remarkably low self noise (<14dBa), not to mention it's capacity to record in ultra wide stereo. This capacity is very effective for nature recording, nocmig, soundscapes, ASMR, binaural and much more. Ultra compact, it can be stored in the bag of your recorder or fit in your pocket. It's discretion enables you to capture sounds that are not possible with conventional microphones. The Immersive Soundscapes Earsight PIP microphone can be used in combination with the Tascam DR-05X, Tascam DR-07X and the Tascam DR-22WL.

Windscreens, especially for outdoor recording, are highly recommended and available here.

PAIRED MINI JACK VERSION (PIP): Compatible with microphone input recorder with plug in power or PIP function.

Technical data Earsight Standard:

Capsule type: Electret Condenser paired stereo set
Directivity: Omni
Sensitivity: -24 dB
Self Noise: 14 dB-A
Signal-to-Noise Ratio: 80 dB
Frequency Range: 20Hz to 20kHz
Maximum SPL Input: 110 dB
Operating Temperature: -25°C->+70°C
Connector: NEUTRIK metal Jack
Audiophile high grade audio capacitor: no
Cable length: 1.5 meter
Cable reference: Sommer Cable - low capacitance cable
Cable Diameter: Ø 2.6 mm outside diameter
Microphone diameter: Ø 8mm
Cable capacitance : 65pF/m
Cable conductance: 0.14 ohm/m

Included:

2 x Paired Earsight microphones
2 x 3D adapter with PIP connection

Guidelines on the use of Immersive Soundscapes microphones:

Set the recording gain as low as possible and then turn it up. This allows you to keep some headroom if a sound event has a higher dynamic range, this will help you avoid saturation. This prevents the appearance of background noise which increases with the gain (this depends a lot on the quality of the recorder).
Avoid tapping on the microphone to check if there is sound, this does not damage the microphone but can cause hearing damage.
Do not disconnect the jack or XLR microphone by pulling its cable.
Do not step on the cable as this could damage the connection between the cable and the capsule (the most fragile part of the microphone).
Be careful not to pull the cable when you want to disassemble the 3D adapter.

Tags:audio (127)microfoon (65)microphone (77)Mikrofon (61)