Different shipping costs may apply for sending nest boxes, see specifications. For pallet shipments abroad, please contact us for a tailor-made offer via [email protected] or +3150 2053300.
Single cavity
Swift Nest Box No. 17 has been used very successfully throughout the whole of Europe for 30 years. The particularly lightweight nest box made of 100% asbestos-free vegetable fibre-reinforced concrete is ideally suited for installation on low-strength façades (insulation, sheathing, etc.). Supplied with U-shaped, flexible hanger made of perforated steel strip and fixing materials (see sketch). The box can also be inserted / plastered in the masonry without a hanger. On request can also be supplied with Type No. 17A/B/C brackets.
External dimensions: W 34 x H 15 x D 15 cm plus wing screws.
Brood chamber: W 30 x H 14 x D 14 cm.
Weight: approx. 3.1 kg.
Includes: Nest box, fixing bracket, screws, plugs.
Especially suitable for colony formation due to three separate brood chambers in a single housing is the Swift Nest Box 17A. Each chamber has its own removable Entrance Rose for easy cleaning and inspection. Installation is very easy, fast and stable, thanks to the two zinced fixing brackets supplied. Can be either hung on the wall or “overhead” e.g. on eaves. The wall-side leg of the retaining brackets can also be installed concealed behind the box if necessary, in order to reduce the installation width. Supplied with fixing materials.
External dimensions: W 98 x H 15 x D 15 cm.
Brood chamber: W 30 x H 14 x D 14 cm.
Weight: approx. 7.1 kg.
Includes: Nest box, fixing bracket, screws, plugs.
These tried and tested Swift Boxes have been used successfully throughout Europe for decades. The lightweight boxes are especially suitable for retrofitting on external façades. Alternatively, they can also be installed directly in a façade.
Material: Certified, asbestos-free, vegetable fibre-reinforced concrete and SCHWEGLER wood-concrete. Galvanised fixing elements.
Installation: The entrance should be a minimum height of 6 to 7 m above the ground or protruding parts of buildings. Greater heights are possible at any time. Attaching the box directly under the roof edge is advantageous. It is very important to ensure that there are no protruding parts, roof parts, pipes, etc. below the entrance, as Swifts approach and fly away very steeply. Therefore, the area under the entrance should be unobstructed and lead directly to the ground. It is advantageous and we expressly recommend that several nesting aids be installed for the formation of Swift colonies. Swifts do not need a minimum distance from fellow species – nesting boxes can therefore be positioned directly next to each other.
Suitable positions: On external façades or under the roofs of all kinds of buildings, for example, houses, industrial buildings, churches, road structures, walls or even cliffs and rock faces. For outdoor installation in very sunny locations we recommend our wood-concrete Swift nesting aid as an alternative, e.g. No. 16. Alternatively, the boxes can also be bricked in or installed in the thermal insulation.
Cleaning and inspection: The Type 17 boxes can be cleaned after the entrance rose has been removed. To this end, the entrance is turned through 90° (entrance hole vertical) and is removed. But in general it is not necessary to clean the boxes if they are used by Swifts. The Swift nest is always made in the darkest corner of the roost and away from the entrance hole.
Colour matching: Type 17 nesting aids are supplied in natural grey. They can be matched to the background colour by painting them with breathable paint.
Versions without removable rose: On request we can also supply you with these boxes without a cleaning opening, i.e. with an elongated 30 x 70 mm hole only. Please ask if required. Optionally, the Swift Boxes can be ordered with entrance for Sparrows or entrance openings for rock shelter occupants.
There are no reviews written yet about this product..
Complete your order
