The MAT-1 Data Logger is a device that is capable of recording absolute orientation (tilt), acceleration (including vibration) and temperature. The logger contains three sensors: a 3-axis magnetometer, 3-axis accelerometer and a thermistor. The logger uses a microSD flash card to store data and a long-life lithium battery that runs for months to years depending on recording rates. The system, packaged in a tough, waterproof PVC (300m depth) or titanium (4500m depth) case, is suitable for continuous use in a wide variety of demanding applications, including underwater.
Key Features & Benefits
- Resolve static orientation to <1°
- Sample accelerometer and magnetometer at up to 64Hz
- Temperature sensor accurate to +/- 0.1 °C
- 8 GB memory card eliminates memory concerns
- Lithium battery allows continuous recording at 64Hz for 6 weeks and for more than 12 months at 4Hz
- USB 2.0 with standard cable and drag and drop data file offload
- Housing Depth Rated to 300m (PVC) 4500m (Titanium)
Applications
The MAT-1 Data Logger has a wide range of uses on land and at sea. It can be used as a motion sensor to record vehicle use on land or to analyze underwater vehicle dynamics at sea. It can monitor the condition of goods during transit, including orientation, temperature, and vibration. Oceanographers are using the logger as a tilt meter to measure and map ocean currents and temperature on the bottom for fisheries management, current modeling and ecological studies.
How is the MAT-1 Datalogger different from other loggers?
The MAT-1 Data Logger uses modern, mass-produced technology, such as magnetometers and accelerometers used in smart phones and game controllers, to create a reliable and affordable data logger. With the included 4 GB microSD card, the logger has thousands of times more memory than most other loggers. This large memory, combined with a low-power electronics design, allows the logger to collect high-resolution data over many months.
Package Contents
- MAT-1 Data Logger (PVC or Titanium)
- 8 GB microSD Card (installed in logger)
- Lithium Battery (installed in logger)
- 3 ft USB A to micro-B Cable
- Spare O-ring with Lubricant
Datasheet MAT-1 Data Logger
User Manual
Domino Software
Domino Software is Lowell Instrument's Python based, open source software for use with the data loggers and current meters. It is used for configuration and control of meters, as well as for conversion of binary data to useful formats. It can be downloaded here.
System Requirements Windows for Domino
- Windows 7/8/8.1/10 (32 or 64 bit)
- Any Intel or AMD x86 processor, Dual Core 2.0+ GHz recommended
- 1 GB RAM minimum (2+ GB recommended)
- 1 GB disk space for the application, additional space for files
- 1024 x 720 monitor minimum
